A. Sample from bottom of a container
- Use a Lowering Cable
The Sub Sampler pro is lowered until the plunger assembly touches the bottom of the container. As the plunger assembly is pushed up, the sample is able to enter the device. When the sampler is raised, the plunger will drop down and seal the sampler.
B. Mid-height sampling
- Use a Lowering Cable and a Control Line
Lower the Sub Sampler Pro into the liquid. At the required sampling depth pull on the control line to raise the plunger. This will allow the liquid to enter the sampler. Release the control line and the plunger will drop down and seal the sampler.
| Part Number | Volume | Material | Diameter | Length | Ex Rated |
| SS-5072A-500 | 500ml | Nickel Plated Brass | 52mm | 427mm | No |
| SS-5072A-1000 | 1000ml | Nickel Plated Brass | 75mm | 438mm | Yes* |
| SS-5072B-500 | 500ml | 316L Stainless Steel | 66mm | 300mm | No |
| SS-5072P-500 | 500ml | PTFE | 70mm | 371mm | No |
*Make sure the sampler is properly earthed (grounded) use the Ex Hand Reel (5070D-05 and Copper Cable (5070C)
Similar Products
Request a Quote
Our experts are here to help. We will respond within 24 hours to your request.
Get in Touch with Us
-
1-888-287-EREC (3732)
Monday – Friday 8am - 4:30pm EST -
Montreal - Tel: (514) 326-8852, Fax: (514) 326-8961
Email : sales@ereinc.com
Request a Sample
Need a closer look? Most products have samples available to ensure you are ordering the correct product for your needs. Some restrictions may apply.
